
To see if this custom-fit item will work for you please tell us what vehicle you'll use it with.
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
Clearing a long driveway means more than just pushing snow. This 84" SnowSport HD includes an electric winch and in-cab control switch to lift and lower the blade without getting out, while the floating, rubber-edged blade follows uneven ground.
Clearing a long driveway rarely means one uninterrupted push. You might need to raise the blade to cross a cleared section, get around a parked vehicle, or head back to the garage. With a manual-lift plow, that means stopping and climbing out into the cold again. This 84" SnowSport HD includes an electric winch so you can stay in the cab. Use the wired switch to wind in the synthetic cable and pull the blade up; when you spool the cable out, the blade lowers under its own weight. The winch mounts to the push frame, and the blade can still float over uneven ground when lowered for plowing. The aluminum blade and box ends help keep snow moving ahead of you. If snow rolls over the top, the 7' SnowSport snow deflector (sold separately) helps reduce blowback.
A gravel driveway might have ruts, raised spots, or grass along its edges. When lowered for plowing, the blade can slide up and down on the push frame as the ground changes, even with the electric winch installed. The thick rubber cutting edge is more forgiving than steel on gravel, brick, pavement, and grass. It can still move loose gravel, especially before the ground freezes. On a front-mounted setup, the blade can tip back and skim over the surface as you reverse rather than scrape on the return pass. This floating action is not powered down pressure.
The 3-position shank lets you aim the blade straight ahead, left, or right to direct snow toward the side of your driveway. Angling is still manual: stop, get out, and change its position before the next pass. The included winch changes how you raise and lower the blade, not how you angle it.
You'll need a suitable 2" receiver hitch at the front or rear of your truck, SUV, or minivan. The receiver is sold separately, and its bottom edge must sit 8" to 16" above level ground. Measure before ordering, especially if your vehicle has been lifted or modified. The kit includes the aluminum blade with box ends, blade markers, 3-position shank assembly, push frame, and mounting hardware, along with the electric winch, synthetic cable, wiring harnesses, and in-cab switch. Initial assembly includes installing and wiring the winch, not just mounting the plow. After assembly, the blade attaches to the frame with pins and can be removed when snow season is over. The low-profile design is intended to keep your factory headlights visible in the plowing and transport positions.
Ratings & Reviews
Do you have a question about this Snow Plow?
Info for this part was:
At etrailer we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.







Kacey
11/16/2017
GREAT! For me, this plow is perfect. My drive way is gravel but mostly dirt and I can pile the snow in my yard and not tear it up! Its fast and warm in the cab of my truck! Thanks for your help